Accessories

Sort By:  
2011 Magazines (2011)

STI 2011® Magazines include features designed to improve your shooting experience with quicker reloads and a flawless finish. Built on presses that have 3x the tonnage of traditional presses giving cleaner stamping and more precise lines. With noticeable improvement on ease of loading and unloading and effortless insertion and locking into pistol grip means faster reloads.

Our new 2011® Magazine is manufactured out of 410 stainless steel, producing a magazine with longer life, greater strength, and better corrosion resistance. STI 2011® magazines are built specifically for all STI 2011® style pistols and frames. In combination with the STI 2011® frame, the STI 2011® magazine allows for maximum round capacity, ranging from 10 to 26 rounds (depending on length and caliber).

-NEW FEATURES-

NEW FOLLOWER & FEED LIP DESIGN

ROUND COUNT

CALIBER LABEL

CONSISTENT DIMENSIONS & STRONGER DESIGN

ONE PIECE CONSTRUCTION

NO SPACER REQUIRED

New 2011 Magazines
Add to Cart
$72.95
CED/DAA RANGEPACK (MEDIUM) - IPSC SHOOTING RANGE BAG
In October 2011 at the world shoot in Greece, we introduced our new CED/DAA RangePack Pro, a new generation of custom made backpacks specifically designed for the serious competition shooter. The shooting world took notice, and since then this extra-large backpack has rocketed to the front of our range bag sales. Despite it being our most expensive bag, dedicated shooters were quick to notice that this bag stands head and shoulders above the rest, and that you get real value for your money. The RangePack Pro has become a runaway success!

The one criticism we received from some, was that the bag was too large for their needs or for their physique, and they implored us to offer a smaller version. Well, we listen to our customers, and are pleased to now offer the new CED/DAA RangePack, the smaller brother to the RangePack Pro.


Like the larger version, the RangePack is designed to stand upright on its rubberized waterproof base, allowing easier access to all compartments and pockets while keeping the bag clean and dry. The upper compartment is large enough to allow 2 pistol insert sleeves to stand upright side by side, and will hold most of your gear. It includes a detachable 7-pocket magazine holder and several other side pockets designed to hold various gear, such as ear defenders, Progrip or a mag brush.

The lower compartment is encased in a hard plastic shell, forming the sturdy base for the larger upper compartment and giving the bag much of its structure. The lower compartment can be used to store ammo, cleaning kits and various items. It may be too small for a full size pistol sleeve to lay flat, but it is large enough to hold a pistol in a smaller case.

The CED/DAA RangePack has the same top quality and detailing as the larger RangePack Pro. It is made from black Ballistic nylon with a smart bright inner red lining. It includes a rain cover neatly packed away in a concealed pocket, ready at hand to be pulled out and wrapped around the bag to keep it dry. The shoulder straps and back are densely padded to provide support and comfort, even when carrying the bag fully loaded. An extra pocket in the upper flap is perfect for storing documents and pens , and 5 large external pockets add considerably to the storage space available.

Like the RangePack Pro, the RangePack is designed to fit perfectly on the CED/DAA RangeCart Pro, and includes the steel eyelets for this purpose.

- Weight: 2.5 kg (5.4 lb.) excluding accessories
2.9 kg (6.4 lb.) with all accessories
- Total Dimensions: 46 H x 36 W x 26 D cm
- Bottom Compartment: 12 H x 30 W x 22 D cm
- Top Compartment: 33 H x 30 W x 22 D cm


Accessories included:
- A red zippered Pistol Sleeve
- A red Universal Pouch
- Customized rain cover
- Cable combination lock
- Custom external rig strap
medium range bag
Add to Cart
$159.95
DAA RACE MASTER MAGAZINE POUCH

Totally unique to the competitive shooting world, the DAA Race Master Magazine Pouch, designed by DAA, using advanced Cad-Cam software, is the perfect complementary add-on for the hugely successful and popular DAA Race Master Holster.

The Race Master Aluminum Pouch is a completely original design, unlike anything else seen on the market to date.  The perfect match in look and performance to the DAA Race Master Holster.

The aluminum construction, allows design and performance not previously possible in a competition mag pouch. The DAA Race Master Mag Pouch provides a wider and more diverse range of adjustability and mounting options. But, even more importantly, it locks solid tight into the selected position until the user chooses to change them.

The wide range of angle adjustments allow the user to position these magazines just as one wants them. This feature, combined with a unique and superior retention system, creates a smoother and more consistent release, which in turn leads to a more reliable and faster reload.

Where other mag pouches apply pressure from the side of the magazines (right to left), the DAA Race Master pouch’s pressure adjustment wheel applies its load to the back of the magazine, squeezing the magazine tube from back to front instead of left to right, as others do. This is amuch more effective manner, which produces far better results.  Since the magazine’s front and back walls are straight and parallel, while the side walls are tapered on all double-stack mags, applying pressure and contact to the back of the mags creates a smoother draw of the magazine. Turning the adjustment wheel changes the tension from very loose to very tight, as may be required on a particular course of fire.

The side and back walls of the Race Master Pouch, have plastic spacers that are design specific to the magazine size. Each Race Master mag pouch is delivered with three sets of spacers: one that fits the larger STI type magazines (assembled as default), and one for the slightly smaller CZ/Tan type double-stack mags. A third pressure spacer is included for Glock/M&P mags. An optional single-stack adapter is available separately.

The hanger system of the DAA Race Master Pouch includes all of the excellent features of the Race Master Holster. The inner side of the hanger fits snugly over the shooter’s outer belt to prevent rocking motion. The hanger can be assembled directly in the desired position, and does not need to slide along the belt, so it can have a tighter fit. The thin steel plate on the inside of the hanger causes no separation between the inner and outer belt. This is critical, when carrying 3 or more pouches side by side. The steel plate can be tightened down, to lock the pouch tightly even on thinner, narrower belts.

The tilt and cant of the Race Master mag pouch is achieved by using a ball-socket joint as in the Race Master Holster. The aluminum ball is locked firmly in place by two set-screws. The ball-socket joint is designed to be set off-center on the belt hanger, which allows the user to choose between two heights when fitting the pouch to his belt. The ball joint locks into the body of the holster so that it will not slip or rotate, even if the center screw comes loose. This is a very unique feature of this pouch.

Three mounting points on the mag pouch body allow for ambidextrous use, as well as making it possible to mount the pouch turned 90 degrees away from the body, which is preferred by some shooters.

The DAA Race Master Magazine Pouch is suitable for right or left-handed shooters, for all double-stack magazines, and is available in Black, Silver, Blue, Red, Purple, Pink, and Gold colors!

Please note that these Race Master pouches are made of aluminium.  It is to be expected that the steel magazines will scratch and burr the top edges of the pouch over time.  However this has no effect on the function of the pouch itself.

Note: Will not fit Large Frame Glock (eg. G20/21) or .45 HK magazines

Add to Cart
$59.95
DAA SINGLE STACK RACER POUCH
The single stack Racer pouch is designed for the “Classic” division which is gaining momentum worldwide. While we do offer Single Stack Adaptors for our wide-body Race Master and Racer pouches, for many “die hard” single-stack fans that is not really good enough. They like the slim, classic size and feel of the single stack magazines – and carrying them in large bulky pouches, designed for magazines twice their width, does not really cut it.

The problem has always been the pitifully few single stack pouches designed for competition use. You can find plenty of pouches for carry and service purposes, but a dedicated competition design for single stack? Not until now!

We have taken our tested and proven innovative “pressure from the back” pouch design used in our Race Master and Racer lines, and adapted it for our new Single Stack Pouch. We tooled a new pouch body, custom made specifically for 1911 Single Stack magazines, a pouch absolutely as slim as possible. We even did away with the inner side spacer, and ”hid” the head of the center screw in the side wall. The entire pouch body measures only 20 mm wide! The opening of the pouch is beveled on three sides to facilitate easier insertion of the magazine into the pouch. The slick inner surface ensures smooth consistent release.

The pouch is ambidextrous and can be mounted on the adjustable belt hanger for right- or left-handed users. It can even be mounted at a 90 deg angle away from the body. The pouch utilizes the same belt hanger as the Racer Pouch, enjoying the solid sturdy design and rock solid angle adjustments that the hanger offers.

Please note!
These single stack pouches will work only with 1911 style Single stack magazines which follow the standard external dimensions! (roughly 13.7mm 0.54” wide, and 34.8mm 1.37” from back to front)
It has come to our attention that some manufacturers are shortening the front to back length of their tubes for the 9mm calibers – and these will not work in our single stack pouches!
Add to Cart
$32.95
Double Alpha DAA PREMIUM BELT

The latest innovative competitive shooting belt from DAA is the DAA Premium belt. This belt offers the best of two worlds!  The extreme rigidity of the DAA Competition belt and the high quality finish and  outlook of the DAA PRO model. 

Both the Competition and PRO belts have been widely received in recent years, and each has their loyal followers. Some choosing the Competition belt if they view rigidity as the most critical feature while others choose the improved appearance and quality feel of the PRO belt.  DAA decided – why force our customers to compromise?  Why not offer the best of both belts – in one?  Result – The DAA Premium Belt

Available in sizes from  28”–50”.

 

How to select the correct belt size: (do not select based on your pant size!)

Overall length, which would mean a DAA belt size 36 or 38" (38" would be the safer bet, a little long is always better than a little short).


1. Measure you actual waist circumference at the height where you plan to wear your belt.
3. Order the belt size which matches your measurement. Round upwards: if you measured 39”, order a belt size 40”.

Add to Cart
$54.00
Double Alpha RANGEPACK PRO - IPSC BACKPACK
The new generation of shooting backpacks has arrived, and it is bigger and better than ever! No other comes close!
Competitive Edge Dynamics and Double Alpha Academy are proud to introduce the latest and BEST in this style of range bags!

Backpacks have a distinct advantage over traditional shoulder-strap bags as they distribute & balance the weight more evenly, making them more comfortable to carry over long distances (often the case on large IPSC shooting ranges). However, standard run-of-the-mill backpacks don’t really cut it. While they may be comfortable to carry, most “Tactical” backpacks do not offer the features and design needed by competitive shooters on the range. Furthermore, they do not always remain upright when placed on the ground.

The new CED/DAA RangePack Pro is functionally designed by shooting professionals from the ground up specifically for IPSC/USPSA, and IDPA shooters. It is an extra large backpack, chalked full of design features and accessories for the serious shooter.

The backpack is designed to stand upright on its rubberized waterproof base, allowing for easy access to all its multiple compartments. Starting with the large lockable upper compartment, which includes a detachable 7-pocket magazine holder. Additional pockets specifically designed for a mag-brush, hearing protectors and a bottle of Progrip or to store the combination cable lock. There is even a pocket designed for the multi-purpose plastic utility box that comes included. The structured cover of this upper compartment includes a zippered pocket for papers, business cards, and pens, as well as elastic straps for additional tools and accessories.

The back panel is designed with dense padding to provide support in all the right places. The thick, densely padded shoulder straps are contoured for the utmost in comfort and function even when packed with 15 or 20 kg of gear.

For those wet rainy days on the range, the backpack includes a rain cover neatly packed away in a concealed pocket, always at hand when needed. The rain cover is designed to protect the backpack while being worn by the user giving access to the shoulder straps, even when covered.

The large lower compartment is encased in a hard plastic shell, giving the bag strength, rigidity, and structure. This lower compartment can easily be accessed through the large lockable front opening and can hold 500 rounds of ammo plus 2 zippered pistol sleeves, or up to 1000 rounds and 1 pistol sleeve. The compartment is even large enough to contain the CED medium size waterproof case!

Color: Black only
Weight:
3.4kg (7.4lbs) excluding accessories
4.9kg (10.8lbs) with all accessories Total Dimensions: 55H x 40W x 32Dcm / 21.5"H x 16"W x 12.5"D
Bottom Compartment: 19.4H x 32.5W x 25Dcm / 7.5"H x 12.8"W x 9.8"W
Top Compartment: 32.5H x 32.5W x 25Dcm / 12.8"H x 12.8"W x 9.8"D

Accessories Included:
- A red zippered Pistol Sleeve
- A red Universal Pouch
- 2.0 Liter Hydration Kit with drinking tube
- A Sturdy 3-legged stool with carry pouch
- Customized Rain Cover
- Multi-Purpose plastic Utility Box
- DAA Mag Brush
- Cable Combination Lock
- Custom External Belt Hanger
In Stock
$200.00
NORDIC +3 MXT KIT 12GA BK NEEDS NUT
Nordic Components, MXT Magazine Extension Kit, +3, 12GA, Combines with Nordic MXT Extension Nuts to Form Complete Extension Kit, Shotgun-Specific Nut Required for Installation on Shotgun

Complete MXT shotgun magazine extension kit for increasing magazine capacity.

  • Anodized 6061 aluminum for strength and weight
  • Available in a variety of lengths providing capacity increases of +1 to +9 for all major brands and most models
  • Features relief groove to eliminate barrel clamp travel and ensure repeatable placement after disassembly (+2 through +9 extensions only)
  • Relief groove located off-center to allow location adjustment by reversing the tube
  • Machined with matching thread pitch on both ends to allow reversing the tube
Add to Cart
$47.75
Shield .40 Trigger (Black)

Hyve Technologies is proud to bring our Monarch Trigger System for the Smith & Wesson Shield! This trigger will fit the Shield 9mm, .40 and the .45. Our shield trigger has removed almost all of the slop from the OEM trigger, allowing for a clean, crisp break. Our trigger and safety are, of course, machined from solid aluminum bar stock and then anodized in each of our seven colors. As with all of our parts, the Monarch is 100% made in the USA.

Add to Cart
$67.95
Per Page      1 - 8 of 8

Shopping Cart

Sub-Total: $0.00
Total: $0.00