Accessories

Sort By:  
2A Armament Package deal
2A Armament package-
T3 Titanium comp - MSRP - $129
16" lightweight 5.56 barrel - MSRP $189
Titanium gas block - MSRP - $79
Beer mug and decal - $13
$375
Add to Cart
$375.00
Ambi Sling/QD Plate
Receiver end plate with ambidextrous sling attachment points and QD mount.


Technical Specs
No castle nut required.
Matte Black Type III hard anodize finish.
Add to Cart
$21.50
Anti Walk Pins
.154" Stainless steel pins with button head hex screws
Add to Cart
$12.00
BCM Gunfighter grip Mod 2
The BCM GunFighter's Grip (GFG) features
 
  • Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips. Same wider profile as the BCM's GUNFIGHTER Grip Mod 3.
  • A new AR15 grip refined for the modern warfighter, optimized for modern weapon manipulation techniques.
  • Reduced grip angle keeps wrist in line with trigger for improved ergonomics and trigger control.
  • Interchangeable inserts for either a smooth front strap or a ‘duckbill’ to cover trigger guard gap.
  • Interchangeable backstraps for various hand sizes, weapons, and grip positions.
  • Hinged trap door with interior storage compartment and water resistant rubber gasket.
  • Made in the U.S.A., manufactured from high quality impact resistant polymers.
Add to Cart
$29.00
CPD magazine 10 RD 6.5mm SS
Stainless Steel 10 Round 6.5 Grendel Magazine by CProducts Defense.


Technical Specs
400 Series Stainless Steel
Finish: Matte black
Follower: Plastic Anti-tilt Blue
Spring: 17-7 Stainless Steel Wire
Weight: 3.28 oz
Add to Cart
$14.00
Crimson Trace & GO MAG Special

Get a Crimson Green Trace and a Go MAG 

Special Pricing for the next 5 orders

Add to Cart
$245.00
Crimson Trace Rail Master Universal Fit Green Laser Sight CMR-206 (CMR 206)
Laser Output:5mW Peak, 515-532nm, Class 3R laser
Dot Size:Approximately 0.5in. at 50ft.
Battery Type:1 CR2 Lithium Battery
Battery Life:More than 2 Hours

Features of Crimson Trace Rail Master Universal Fit Green Laser CMR-206:

  • Patented Instinctive Activation system activates laser when firearm is held in the natural firing grip.
  • Operation modes include Momentary, Strobe, and Constant On.
  • Fits pistols, rifles, and shotguns with M1913 Picatinny or Weaver Accessory Rail.
  • Brightest green laser allowed by law at 5mW peak, 515nm, Class 3R
  • 2 hours of constant run time.
  • 5 minute auto shut-off for power conservation.
  • Can easily be installed and switched between firearms.
  • Securely fastened with the Crimson Trace's Secure Lock Technology (SLT).
  • Dual activation controls allow the user to instantly activate or deactivate the laser.
  • Fully adjustable for windage and elevation.
  • Factory sighted at 50ft.
  • Master On/Off Switch
  • Free batteries for life.
  • Quick user installation.
  • 3 year full warranty.
Add to Cart
$229.00
ENGRAVED VEHICLE MOUNTING PLATE - COME AND TAKE IT

***MUST BE USED WITH A GO-MAGNET (SOLD SEPARATELY)***

Have a mounting plate someplace where people see it?  Why not make a statement with it?!  These mounting plates are charcoal color powder coated and textured to be anti-slip.  They are ideal for inside your vehicle, by the bed, or by the front door.  The design is laser engraved, ensuring that it will not be worn or damaged from use.  We have been using plates identical to these at gun shows for months, and they still look brand new.  

Size:  2" x 3"

Weight: 0.1 lb.

Includes: Engraved Plate and 4 ea. 1/2" self-tapping screws (black)

GO MAG MOUNTING PLATE COME & TAKE IT
Add to Cart
$15.00
ENGRAVED VEHICLE MOUNTING PLATE - DON'T TREAD ON ME

***MUST BE USED WITH A GO-MAGNET (SOLD SEPARATELY 13.99)***

Have a mounting plate someplace where people see it?  Why not make a statement with it?!  These mounting plates are charcoal color powder coated and textured to be anti-slip.  They are ideal for inside your vehicle, by the bed, or by the front door.  The design is laser engraved, ensuring that it will not be worn or damaged from use.  We have been using plates identical to these at gun shows for months, and they still look brand new.  

Size:  2" x 3"

Weight: 0.1 lb.

Includes: Engraved Plate and 4 ea. 1/2" self-tapping screws (black)

GO MAG PLATE DON'T TREAD ON ME
Add to Cart
$15.00
ENGRAVED VEHICLE MOUNTING PLATE - SECOND AMENDMENT

***MUST BE USED WITH A GO-MAGNET (SOLD SEPARATELY)***

Have a mounting plate someplace where people see it?  Why not make a statement with it?!  These mounting plates are charcoal color powder coated and textured to be anti-slip.  They are ideal for inside your vehicle, by the bed, or by the front door.  The design is laser engraved, ensuring that it will not be worn or damaged from use.  We have been using plates identical to these at gun shows for months, and they still look brand new.  

Size:  2" x 3"

Weight: 0.1 lb.

Includes: Engraved Plate and 4 ea. 1/2" self-tapping screws (black)

GO MAG PLATE SECOND AMENDMENT
Add to Cart
$15.00
ERGO suregrip AT
Fits AR-15 type firearms in .223 and .308 Ergonomically correct finger grooves Integrated rear upper extension supports the web of your hand Superior Rhino Hide™ texture improves weapon control Virtually impervious to oils and solvents Over molded SUREGRIP™ material with original texture.
THE ORIGINAL ERGO GRIP FOR AR15/AR10 (SUREGRIP)
Add to Cart
$23.00
Gift Certificates
Give the Gift of Self Defense Don't always know the right gift? Its hard because products always change and there are so many out there right! Purchase a gift card from North Fork Supply and let them choose. Gift Cards Can be used for purchases on the site, at shows and for custom orders. Once purchased we will send you your discount/gift card code. Select Custom if you wish for an amount not shown we will contact you once purchased. *Gift Cards Good for 1 Year of purchase
Gift Certificates
Add to Cart
$25.00
GO-MAGNET W/SMALL MOUNTING PLATE

GO-Magnets are the premier gun organizer magnets on the market.  Superior in both strength and design, a single GO-Magnet will easily hold an object weighing up to 15 lbs.  Magnetic on both sides, GO-Magnets offer the added bonus of not needing to use screws or staples to hold them in place.  You can get your pistols out of their boxes and displayed, or you can hide your pistol in your vehicle or under your desk.  With GO-Magnets, the possibilities are endless.

Includes: 1 GO-Magnet & 1 Small Zinc Coated Mounting Plate (with screws)

Dimensions: 4.25" x 1" x .5"

Weight: 0.2 lbs

Go Mag Basic Set Up
Add to Cart
$15.00
Lancer L5AWM 30rd Magazine - Opaque Black
Lancer set out to design a better 5.56 magazine; one with the reliability of steel, durability of polymer and weight of aluminum - the L5AWM. The magazine design includes a one piece, wrap-around steel feed lip assembly and an aggressive surface texture to create the ultimate hybrid magazine tough enough for military, LE and commercial use.

The L5AWM is compatible with modern weapon systems, including M4/M16/AR, SCAR16, HK416, ARX160, SIG556, ARC, SA80 chambered in 5.56mmX45/.223rem.

Designed, tooled, manufactured and assembled in the USA.

Weight 4.4oz

The following states have restrictions on "High Capacity" magazines:

  • 10 Round - CA, MA, MD, NY, HI
  • 15 Round - NJ

We will not ship to these states

Add to Cart
$14.00
LAW TACTICAL LLC - AR-15/M16 GEN3-M FOLDING STOCK ADAPTER

SPECS: Machined 4140 steel, DLC finish, matte black. Adds 1.3" (3.4cm) to length of pull. 8.5 oz. (241g) wt. Do not fire rifle with stock folded.

Put A Folding Stock On Any AR-Pattern Rifle!

Law Tactical's steel adapter enables installation of a folding stock on any AR-15 to create a smaller-profile rifle for easy deployment from a vehicle or transport in non-permissive environments. Works with standard gas impingement OR gas piston system. Accepts A2, mil-spec M4-style, and commercial carbine receiver extension tube and almost any stock that fits them. Compatible with all standard bolt carrier groups, including full-auto and .308 size. Single-button operation for quick folding and unfolding and steel locking latch keeps stock securely in place when extended. Gen3-M has a lowered hinge to avoid interference when charging the weapon, and a setscrew keeps the adapter securely affixed to the receiver. Hinge tension is adjustable so you can choose how stiff the folding mechanism is. Includes special bolt carrier extension (no tools to install/remove). Current version utilizes standard buffer retaining pin and spring. Stock adapter features DLC coating

BLACK
Add to Cart
$210.00
LAW TACTICAL LLC - AR-15/M16 GEN3-M FOLDING STOCK ADAPTER (FDE)

SPECS: Machined 4140 steel, DLC finish, matte black. Adds 1.3" (3.4cm) to length of pull. 8.5 oz. (241g) wt. Do not fire rifle with stock folded.

Put A Folding Stock On Any AR-Pattern Rifle!

Law Tactical's steel adapter enables installation of a folding stock on any AR-15 to create a smaller-profile rifle for easy deployment from a vehicle or transport in non-permissive environments. Works with standard gas impingement OR gas piston system. Accepts A2, mil-spec M4-style, and commercial carbine receiver extension tube and almost any stock that fits them. Compatible with all standard bolt carrier groups, including full-auto and .308 size. Single-button operation for quick folding and unfolding and steel locking latch keeps stock securely in place when extended. Gen3-M has a lowered hinge to avoid interference when charging the weapon, and a setscrew keeps the adapter securely affixed to the receiver. Hinge tension is adjustable so you can choose how stiff the folding mechanism is. Includes special bolt carrier extension (no tools to install/remove). Current version utilizes standard buffer retaining pin and spring. Stock adapter features DLC coating

FDE
Add to Cart
$220.00
NFS LOGO Charging Handle
The XCH eXtended Charging handle easily upgrades any AR making it easier than ever. Large scopes or thick gloves can create a challenge when charging your rifle. Our extended latch, with its ergonomic design, allows for faster and smoother operation of the charging handle. Technical Specs Made from 7075 Billet Aluminum Ergonomic design for easy gripping Upgrades any mil spec charging handle Choose from black or red
Add to Cart
$42.00
Seekins Precision billet trigger guard
The Seekins Precision Billet Trigger Guard is a functional upgrade for any mil-spec lower receiver. Machined from a solid piece of 6061-T6, the profile and size accommodate winter gloves while maintaining precise trigger control. Easy to install, the Billet Trigger Guard securely attaches with a retention screw and eliminates the gap between the receiver and mil-spec trigger guards. This upgrade should be standard on any AR build.
In Stock
$19.00
Tunable Low Profile Gas Block
Description
 
Stainless steel tunable low profile gas block is designed to perfectly tune your rifle. Set it and forget it! This gas block is included with all DI ODIN Works barrels.
Technical Specs
  • 303 stainless steel
  • Stainless steel tuning screws
  • Fits 0.750" barrels
  • Tunable gas block designed to perfectly tune your rifle
  • Set it and forget it
  • Included with all DI ODIN Works barrels
  • Includes roll pin, set screws, and wrench
Tunable Gas Block
Add to Cart
$54.00
Per Page      1 - 19 of 19

Shopping Cart

Sub-Total: $0.00
Total: $0.00