Triggers

Sort By:  
Anti Walk Pins
Add to Cart
$24.95
Elf AR-9/AR-45
Add to Cart
$221.00
$259.00
The ELF Drop-In Match Trigger has been built for performance. The only AR- 15 trigger using aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver.
Add to Cart
$221.00
$259.00
ELF-SE Trigger
Add to Cart
$145.00
$169.00
Fits any mil-spec AR-15 (Large pin Colt available) Absolutely Drop-Safe regardless of pull-weight Adjustable from 2 3/4lbs to 4lbs without removing from lower Exclusive double double wound hammer spring and heavy hammer ensure proper ignition of any ammunition Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer needle bearings for smoother and faster firing 100% made in America with a Lifetime Guarantee!
Add to Cart
$235.00
$249.00
Elf Anti Walk Pins

AR-15 Non-Rotating Anti-walk Trigger and Hammer Pins

So easy to install, it takes just seconds to protect your AR-15 or irreplaceable M-16 receiver. Installs by simply clipping master link over protective plate.

.154 Diameter Black Oxide Finish

Strongest AR-15 / AR-10 / M-16 pins available. The pins are made of hardened American steel and will easily withstand the impact of high powered semi and full auto weapons. The anti rotation feature will protect your receiver from wear. Side plates will protect your finish. They can be installed from either side and either direction. Finish is black oxide. No special tools required for installation or removal.

Easy installation
No tiny screws 
No tiny clips 
Just a screwdriver
and one click

Anti Walk Pins
Add to Cart
$24.95
Elf AR-9/AR-45
The ELF Drop-In Match Trigger has been built for performance. The only AR- 15 trigger using aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none AR- 15 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The match trigger may be ordered with a curved or straight shoe. The amazingly short takeup, glass-rod crisp break and next to zero over-travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your current use. If you are looking for the finest adjustable trigger for your AR-15 platform, this is the trigger system for you. Features Fits any mil-spec AR-15 (Large pin Colt available) Absolutely Drop-Safe regardless of pull-weight Factory set Pull-weight is approximately 50% lighter than that of a standard AR-15 trigger, providing a great combination of speed and accuracy Adjustable from 4lbs to 2 3/4lbs without removing from lower Full power hammer spring ensures proper ignition of primer Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer needle bearings for smoother and faster firing Benefits a wide variety of AR-15 enthusiasts, including collectors, competitive shooters, hunters, military, law enforcement, and disabled veterans 100% made in America with a Lifetime Guarantee!
Elf AR-9/AR-45
Add to Cart
$221.00
$259.00
Elf Match Trigger
The ELF Drop-In Match Trigger has been built for performance. The only AR- 15 trigger using aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none AR- 15 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The match trigger may be ordered with a curved or straight shoe. The amazingly short takeup, glass-rod crisp break and next to zero over-travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your current use. If you are looking for the finest adjustable trigger for your AR-15 platform, this is the trigger system for you. Features Fits any mil-spec AR-15 (Large pin Colt available) Absolutely Drop-Safe regardless of pull-weight Factory set Pull-weight is approximately 50% lighter than that of a standard AR-15 trigger, providing a great combination of speed and accuracy Adjustable from 4lbs to 2 3/4lbs without removing from lower Full power hammer spring ensures proper ignition of primer Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer needle bearings for smoother and faster firing Benefits a wide variety of AR-15 enthusiasts, including collectors, competitive shooters, hunters, military, law enforcement, and disabled veterans 100% made in America with a Lifetime Guarantee!
The ELF Drop-In Match Trigger has been built for performance. The only AR- 15 trigger using aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver.
Add to Cart
$221.00
$259.00
ELF-SE Trigger
The ELF-SE Drop-In Trigger maintains the Elftmann reputation for quality,
craftsmanship and customer service in an affordable package. The mid-
weight hammer combined with our exclusive .043 double double wound
polished piano wire hammer spring provide reliable ignition and fast lock time.
Made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-
grade aluminum.
Extremely short takeup, clean crisp break and very short, positive reset. Non -
adjustable 3.5lb pull weight, non-skeletonized trigger shoe and no
bearings...but we’ll put it up against any trigger made - except our
performance series utilizing sealed bearings.
Ultra-Light housing is standard - Total physical weight of entire unit is just
2.3oz
Available with a curved or straight shoe.
ELF-SE Trigger
Add to Cart
$145.00
$169.00
Elftmann Tactical 308 Trigger

The ELF Drop-In AR-10 Trigger has been built to withstand the punishment of

high powered calibers. The only AR-15 trigger using aerospace grade sealed

bearings, making for an incredibly smooth and fast trigger pull. The heavy

hammer combined with our exclusive .043 double double wound polished

piano wire hammer spring ensure full ignition of any ammo including .308 and

7.62x39. Pull weight from 2 3/4lbs to 4lbs is so easy to adjust it can be done in

seconds without removing the trigger from your lower receiver. The AR-10

trigger is essentially the service trigger with a lighter pull weight range.

A second-to-none AR-15 drop-in trigger system that is strong and light, made

of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade

aluminum. Installation can be done in minutes using your AR’s original

hammer and trigger pins. The AR-10 trigger may be ordered with a curved or

straight shoe.

The amazingly short take-up, glass-rod crisp break and next to zero overtravel

can be compared to the finest custom 1911 triggers. Adjustability puts

you in charge based on your preference. If you are looking for the finest

adjustable trigger for your service AR-15 platform, this is the trigger system for

you.

Fits any mil-spec AR-15 (Large pin Colt available)

Absolutely Drop-Safe regardless of pull-weight

Adjustable from 2 3/4lbs to 4lbs without removing from lower

Exclusive double double wound hammer spring and heavy hammer ensure proper ignition of

any ammunition

Very short pull and reset allows for rapid follow up shots and greater accuracy

Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight

aircraft-grade aluminum and hardened steel

Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing

High performance trigger and hammer needle bearings for smoother and faster firing

100% made in America with a Lifetime Guarantee!

 

Fits any mil-spec AR-15 (Large pin Colt available) Absolutely Drop-Safe regardless of pull-weight Adjustable from 2 3/4lbs to 4lbs without removing from lower Exclusive double double wound hammer spring and heavy hammer ensure proper ignition of any ammunition Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer needle bearings for smoother and faster firing 100% made in America with a Lifetime Guarantee!
Add to Cart
$235.00
$249.00
Per Page      1 - 5 of 5

Shopping Cart

Sub-Total: $0.00
Total: $0.00