Special Offers

Sort By:  
The Ballistic Advantage AR15 Lower Receiver is the perfect base for your next build.
Add to Cart
$60.00
$80.00
Elf AR-9/AR-45
Add to Cart
$221.00
$259.00
The ELF Drop-In Match Trigger has been built for performance. The only AR- 15 trigger using aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver.
Add to Cart
$221.00
$259.00
ELF-SE Trigger
Add to Cart
$145.00
$169.00
Fits any mil-spec AR-15 (Large pin Colt available) Absolutely Drop-Safe regardless of pull-weight Adjustable from 2 3/4lbs to 4lbs without removing from lower Exclusive double double wound hammer spring and heavy hammer ensure proper ignition of any ammunition Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer needle bearings for smoother and faster firing 100% made in America with a Lifetime Guarantee!
Add to Cart
$235.00
$249.00
Upper Receiver Matching Set
Add to Cart
$430.00
$459.00
16" .223 Wylde Ballistic Advantage Fluted SS Midlength Premium Series with pinned gas block

This .223 Wylde chambered 16 inch barrel is machined from 416R Stainless Steel with a bead blasted finish. Our Premium Series Barrels feature a FailZero Nickel Boron Coated Extended M4 Feed Ramp Extension.

Includes pinned gas block

This barrel features some of the most aggressive and weight reducing flutes on the market. Coming in at a total weight of 27 oz. We've managed to cut almost a pound out of the barrel while not sacrificing one ounce of accuracy!

Additional Info

Length16"
Material416R Stainless Steel
ProfileSPR
FinishBead Blasted
Gas System LengthMid-Length
Gas Block Journal.750"
Twist Rate1:8 inches
Muzzle1/2x28 Threaded
Weight27.4 oz
Other InfoHP and MPI Tested
Includes pinned gas block
Add to Cart
$224.00
$260.00
16" 5.56 BA Hanson Midlength AR 15 Barrel w/ Lo Pro, Performance Series (.625" Gas Block Journal) (16" performance series 5.56)
This 5.56 chambered 16 inch Performance Series Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish. Our Performance Series Barrels feature a FailZero Nickel Boron Coated Extended M4 Feed Ramp Extension. Length16" Material4150 Chrome Moly Vanadium ProfileHanson FinishQPQ Corrosion Resistant Gas System LengthMid-Length Gas Block Journal1.00" Gas Block Seat for .625" Low Profile Gas Blocks Only Twist Rate1:7 inches Muzzle1/2x28 Threaded Weight22 Other InfoHP and MPI Tested
Add to Cart
$190.00
$225.00
18" .308 Ballistic Advantage Government Midlength AR 10 Barrel, Premium Series

This .308 chambered (DPMS style) 18 inch barrel is machined from 416R Stainless Steel with a bead blasted finish. Our Premium Series Barrels are HP and MPI tested, ensuring the best in quality and accuracy.

Additional Info

Length18"
Material416R Stainless Steel
ProfileTactical Government
FinishBead Blasted
Gas System LengthMid-Length
Gas Block Journal.750"
Twist Rate1:10 inches
Muzzle5/8x24 Threaded
Weight39oz
Other InfoHP and MPI Tested
with pinned gas block
Add to Cart
$250.00
$300.00
20" Ballistic Advantage 6.5 Creedmoor Rifle Length Fluted AR 10 Barrel, Premium Series

This 6.5 Creedmoor chambered (DPMS style) 20 inch barrel is machined from 416R Stainless Steel with a bead blasted finish. Our Premium Series 6.5 Creedmoor Barrels are proof fired and MPI tested, ensuring the best in quality and accuracy.

6.5 Creedmoor is the perfect option if you're looking to maximize the accuracy of your .308 platform. Apart from a simple barrel swap, all parts, including the bolt and mag, remain the same as a normal .308 build. The inherently accurate 6.5mm projectile, the increasing amount of off-the-shelf match grade factory 6.5 Creedmoor ammunition, and the extremely soft recoil pulse all combine to create one of the best black rifle options available.

Additional Info

Length20"
Material416R Stainless Steel
ProfileHeavy
FinishBead Blasted
Gas System LengthRifle
Gas Block Journal.875"
Twist Rate1:8 inches
Muzzle5/8x24 Threaded
Weight59.5oz.
Other InfoMPI Tested
no gas block
Add to Cart
$284.00
$350.00
20" Ballistic Advantage 6.5 Grendel DMR Fluted Stainless Steel Rifle Length AR 15 Barrel, Premium Series

This 6.5 Grendel "Type 2" chambered 20 inch barrel is machined from 416R Stainless Steel with a bead blasted finish. Our Premium Series Barrels feature a FailZero Nickel Boron Coated Extended M4 Feed Ramp Extension.

Includes pinned gas block

This barrel features some of the most aggressive and weight reducing flutes on the market. Coming in at a total weight of __ oz. We've managed to cut almost a pound out of the barrel while not sacrificing one ounce of accuracy!

Additional Info

Length20"
Material416R Stainless Steel
ProfileDMR
FinishBead Blasted
Gas System LengthRifle
Gas Block Journal.750"
Twist Rate1:8 inches
Muzzle5/8x24 Threaded
Weight34 oz
Other InfoHP and MPI Tested
with pinned gas block
Add to Cart
$300.00
$360.00
22 Nosler Odin Works 18" DMR Rifle
Recognizing what the new 22 Nosler round has to offer, ODIN Works is proud to introduce the 18" DMR Rifle. Includes the stainless steel tunable gas block.
Technical Specs
Profile: DMR
Length: 18"
Gas Placement: Rifle
Made from 416R Stainless Steel
Hand-lapped
M4 Feed ramps
1/2-28 threading
1" MOA guaranteed
Add to Cart
$280.00
$305.00
Ballistic Advantage AR15 Lower

The Ballistic Advantage AR15 Lower Receiver is the perfect base for your next build. This high quality, mil-spec lower receiver is machined from 7075-T6 forged aluminum with a hard-coat anodized finish. It features a nylon tipped upper tension screw, ensuring a tight fit with any standard AR15 upper receiver, and a flared magwell for easier insertion of magazines, and the rear takedown pin detent hole is threaded for a 4-40 set screw. Includes standard Mil-Spec Lower Parts Kit.

Specifications

  • Material: Machined from 7075-Tg forged aluminum
  • Finish: Matte black hard-coat anodized mil-spec 8625 Type 3 Class 2
  • Markings: Cal Multi
  • Compatibility: Works with standard AR15 components and magazines
  • Weight: 8.35oz


FFL Terms and Conditions
- Any items placed on the same order as a lower receiver will also be shipped to the FFL. If you would like additional items shipped to you directly, please place them on a separate order.
- Please enter your information or the receiving party's (the person that will be picking it up) information under "Recipient Name" while checking out. There will be a seperate field for FFL name, phone and zip code and we will obtain the shipping address directly from them.
- To expedite your order, please have your dealer email their FFL to us. If the dealer you are using to transfer a firearm has not sent us a currently updated FFL to put on file, there will be an extended period of time needed to process your order.

The Ballistic Advantage AR15 Lower Receiver is the perfect base for your next build.
Add to Cart
$60.00
$80.00
Elf AR-9/AR-45
The ELF Drop-In Match Trigger has been built for performance. The only AR- 15 trigger using aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none AR- 15 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The match trigger may be ordered with a curved or straight shoe. The amazingly short takeup, glass-rod crisp break and next to zero over-travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your current use. If you are looking for the finest adjustable trigger for your AR-15 platform, this is the trigger system for you. Features Fits any mil-spec AR-15 (Large pin Colt available) Absolutely Drop-Safe regardless of pull-weight Factory set Pull-weight is approximately 50% lighter than that of a standard AR-15 trigger, providing a great combination of speed and accuracy Adjustable from 4lbs to 2 3/4lbs without removing from lower Full power hammer spring ensures proper ignition of primer Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer needle bearings for smoother and faster firing Benefits a wide variety of AR-15 enthusiasts, including collectors, competitive shooters, hunters, military, law enforcement, and disabled veterans 100% made in America with a Lifetime Guarantee!
Elf AR-9/AR-45
Add to Cart
$221.00
$259.00
Elf Match Trigger
The ELF Drop-In Match Trigger has been built for performance. The only AR- 15 trigger using aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none AR- 15 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using your AR’s original hammer and trigger pins. The match trigger may be ordered with a curved or straight shoe. The amazingly short takeup, glass-rod crisp break and next to zero over-travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your current use. If you are looking for the finest adjustable trigger for your AR-15 platform, this is the trigger system for you. Features Fits any mil-spec AR-15 (Large pin Colt available) Absolutely Drop-Safe regardless of pull-weight Factory set Pull-weight is approximately 50% lighter than that of a standard AR-15 trigger, providing a great combination of speed and accuracy Adjustable from 4lbs to 2 3/4lbs without removing from lower Full power hammer spring ensures proper ignition of primer Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer needle bearings for smoother and faster firing Benefits a wide variety of AR-15 enthusiasts, including collectors, competitive shooters, hunters, military, law enforcement, and disabled veterans 100% made in America with a Lifetime Guarantee!
The ELF Drop-In Match Trigger has been built for performance. The only AR- 15 trigger using aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver.
Add to Cart
$221.00
$259.00
ELF-SE Trigger
The ELF-SE Drop-In Trigger maintains the Elftmann reputation for quality,
craftsmanship and customer service in an affordable package. The mid-
weight hammer combined with our exclusive .043 double double wound
polished piano wire hammer spring provide reliable ignition and fast lock time.
Made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-
grade aluminum.
Extremely short takeup, clean crisp break and very short, positive reset. Non -
adjustable 3.5lb pull weight, non-skeletonized trigger shoe and no
bearings...but we’ll put it up against any trigger made - except our
performance series utilizing sealed bearings.
Ultra-Light housing is standard - Total physical weight of entire unit is just
2.3oz
Available with a curved or straight shoe.
ELF-SE Trigger
Add to Cart
$145.00
$169.00
Elftmann Tactical 308 Trigger

The ELF Drop-In AR-10 Trigger has been built to withstand the punishment of

high powered calibers. The only AR-15 trigger using aerospace grade sealed

bearings, making for an incredibly smooth and fast trigger pull. The heavy

hammer combined with our exclusive .043 double double wound polished

piano wire hammer spring ensure full ignition of any ammo including .308 and

7.62x39. Pull weight from 2 3/4lbs to 4lbs is so easy to adjust it can be done in

seconds without removing the trigger from your lower receiver. The AR-10

trigger is essentially the service trigger with a lighter pull weight range.

A second-to-none AR-15 drop-in trigger system that is strong and light, made

of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade

aluminum. Installation can be done in minutes using your AR’s original

hammer and trigger pins. The AR-10 trigger may be ordered with a curved or

straight shoe.

The amazingly short take-up, glass-rod crisp break and next to zero overtravel

can be compared to the finest custom 1911 triggers. Adjustability puts

you in charge based on your preference. If you are looking for the finest

adjustable trigger for your service AR-15 platform, this is the trigger system for

you.

Fits any mil-spec AR-15 (Large pin Colt available)

Absolutely Drop-Safe regardless of pull-weight

Adjustable from 2 3/4lbs to 4lbs without removing from lower

Exclusive double double wound hammer spring and heavy hammer ensure proper ignition of

any ammunition

Very short pull and reset allows for rapid follow up shots and greater accuracy

Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight

aircraft-grade aluminum and hardened steel

Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing

High performance trigger and hammer needle bearings for smoother and faster firing

100% made in America with a Lifetime Guarantee!

 

Fits any mil-spec AR-15 (Large pin Colt available) Absolutely Drop-Safe regardless of pull-weight Adjustable from 2 3/4lbs to 4lbs without removing from lower Exclusive double double wound hammer spring and heavy hammer ensure proper ignition of any ammunition Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing High performance trigger and hammer needle bearings for smoother and faster firing 100% made in America with a Lifetime Guarantee!
Add to Cart
$235.00
$249.00
Gibbz Arms G4 AR-15 Receiver Set (G4)

G4 Receiver Set

Includes:

GIBBZ Arms Side Charging Upper Receiver

GIBBZ Arms Lower Receiver


GIBBZ ARMS Upper Receiver 

– GIBBZ Arms Patent Pending Left Side Charging Handle
– Non-reciprocating with detent to keep the charging handle forward during operation
– Uses all Mil-Spec and most Custom Bolt Carriers without modification
– Beveled Ejection Port
– Full 15 Slot Picatinny Rail
– Rear Bolt carrier door to allow for easy bolt carrier removal and still keeping gasses in during operation (important for suppressed fire)
– Included is our Enhanced Cam Pin which is optimized for our side charging upper with Melonite coating.
– Charging handle cover for keeping operating gasses in (also important for suppressed fire)

 

GIBBZ ARMS Lower Receiver 

– Large Mag Well Bevel
– Integral Trigger Guard with relief for fingers
– Optimized for Ambidextrous Mag Button
 Type 3 hard coat anodizing

Upper Receiver Matching Set
Add to Cart
$430.00
$459.00
Per Page      1 - 12 of 12

Shopping Cart

Sub-Total: $0.00
Total: $0.00